Category Archives: Computers & Electronics

Run Your Business More Profitably with GPS Fleet Tracking System

If you are in the transportation business, one major issue that you face is the excess distance traveled by your drivers as well as extra time taken by them to complete a journey. Thanks to the advent of technology, this no longer remains to be a challenge. With GPS-based fleet tracking, you can now easily monitor the whereabouts of your fleet vehicles and keep a complete tab on the drivers who used to cause a dent in your business earlier.

Advantage to Industries

While transportation business primarily benefits the facility of GPS truck tracking, other industries which require fleet services also benefit with the technology big time. These industries include construction, waste management, food supply services, pest control services, and government agencies just to name a few. All these industries depend on fleet vehicles for running their businesses and with the help of GPS tracking system, they can check the status of deliveries themselves, without depending on the word of mouth from the driver who can always play foul due to some reason or the other. Check out Future Fleet

Fleet Tracking

List of Benefits

In addition to the most obvious benefit of being able to track the vehicle, there are multiple benefits of GPS-based fleet tracking. The installation of a vehicle GPS tracking system gives an alert message to the drivers that now their movements would be tracked by the owners of the fleet vehicles. This makes them act more sensibly and makes them more responsible towards their work. Apart from that, in case of a vehicle breakdown, in worst cases if the driver does not have any means to communicate with the owners, he would still not be stranded as with the help of GPS tracking, the fleet managers would come to know about the mishap, and they would send roadside assistance in a matter of no time.

With the help of GPS tracking, one can increase the profitability of the business manifolds as idle time of the vehicle would be almost be negated and productivity of drivers is bound to increase under proper monitoring and vigilance. Also, there would be a huge decrease in the operational cost of running the fleet vehicles as there would be no extra travel of the vehicles on longer routes under proper monitoring by means of GPS tracking.

Save Fuel with GPS Tracking

One can cut down drastically on the fuel expenses as there would be no additional and unnecessary runtime of the vehicles. On top of that as most GPS Fleet Tracking systems are intelligently designed to calculate expected time of arrival at a particular destination, business owners can give more accurate delivery timeline commitments to their customers.

Most of the latest GPS tracking systems do not require any installation of software as these are web based applications. Thanks to the historical reporting feature of these GPS systems, a lot of analysis on the distance traveled, routes were taken, fuel consumed and many more things can be noted for the betterment of the business. Visit http://www.futurefleet.com.au/ for more details.

Benefits of Hiring Competent Electricians in Gold Coast

The electric and electrician are intertwined with each other. Just when a disruption in the electric power system occurs, people feel the need for an electrician. There is a wide variety of devices used in an electric wiring system in domestic or commercial environments. And there is the complexity of circuitry also. The electricians take note of everything and make necessary installations, replacements and changes as and when necessary. They make the life of a common man smooth and send electricians Gold Coast offers for your convenience. Gold Coast has a number of well-known electric contractors or electricians which take care of electrical problems in every household, and retail shops, supermarkets, factories, warehouses, and every type of office.

What an Electrician Does

The electricians Gold Coast market has today are licensed. There are different licensing authorities which provide licenses depending upon the proficiency of an electrician.

Electricians are trained in providing services in multiple aspects. Here are some of the services offered by them-

Installations – This is the most complicated job that the electricians perform. Installing an electric wiring system in a house, building or apartment is a gigantic job. It needs a lot of planning, coordination with other professionals like building engineer and carpenters, etc. who have made provisions for concealing wiring, and professional excellence in installing the entire electric system smoothly and securely.

Repair and maintenance – Apart from the installation of a new electric wiring system, electricians remain heavily engaged in repair and maintenance jobs. Repair jobs may be as little as replacing a switch to as heavy as finding circuitry faults for which electric supply is disrupting. Safety checks, replacement of defective switches or fittings, checking all supportive accessories, etc., are a part of maintenance jobs electricians Gold Coast market has undertaken.

Lighting design and installations – Designing custom-made lighting systems commensurate with other furniture and fittings in the home or office has become a trend in Gold Coast and adjoining areas. Electricians need to work in collaboration with interior decorators in this matter.

Installations of electrical appliances – Homes without latest electrical gadgets are unthinkable. Electricians hence,  take the responsibility of entire electrical set-up for appliances such as TV, Refrigerator, AC, Washing Machine and computer, etc.

Apart from these, there are many other jobs, including electrical servicing and refurbishing in commercial places, Real Estate maintenance, Designing an energy efficient system, etc., which are also taken care of by the electricians.

How to Avail the Best Electrical Services

Availing the best service is not at all tough. Plenty of information is now available on the Internet. Details regarding licensed electrical contractors and electricians, their profile, and even the license class can also be found online. For reliable electricians Gold Coast has to offer, people can book a service provider at their convenient time and date.

In the present standard of lifestyle, electric has become inevitable, and so are the services of electricians. All one has to do is contact a right electrician who can meet all your needs well within the budget.

Battling the Sadim Touch

With the increasing level of sophistication gold counterfeiters have achieved in recent years, it can be very difficult to accurately test gold bars.  Like a criminally reincarnated version of Isaac Newton, or Sadim, the antithesis of Midas, these counterfeiters are using variations of non-precious metals, perfectly forged mints, and inserted lead to counter traditional non-destructive methods of testing gold bars for authenticity.  Whether you’re a broker, jeweler, or of the layman variety, you’ll want to test your gold bars, bullion, and coins for authenticity with the least invasive method possible.  That’s when a small, portable, easy to use device like GT-Ultra becomes your greatest ally in combating counterfeits.

test gold bars

In case you have no idea how to check if gold is real, I’ll briefly elaborate on a couple of the currently most used methods to test gold bars and why they aren’t the most ideal choices.  First, there is the density test that uses volume displacement to measure the density of your material.  The problem with this method is that the density of gold can easily be replicated with other materials such as lead.  Second, is a method that involves putting a drop of nitric acid on the gold to see how it reacts.  Any reaction (change in color, dissolving, etc.) would indicate a fake.  However, if your gold coins or bullion are counterfeits and merely just gold plated, this test will yield no negative results, as the acid will not have a reaction to the gold plating.  You would have to crack your gold open like a kinder egg, only, you’re not going to find a nice kinder egg surprise, and best case scenario, your gold is real, but now you have damaged gold bullion or coin.

So by now you may be wondering how to test gold at home without acid or an unreliable density test.  The answer is with the gold purity testing machine, the GT-Ultra. This product, offered on http://testyourgold.com, uses ultrasound technology to test gold bars by sending oscillating sound pressure waves through your gold until it makes contact with a non-gold surface, sending you feedback on the actual thickness of the gold.  So if your gold happens to be imbued by the touch of Sadim, your GT-Ultra may register your 10mm gold bullion as only 2mm.  I prefer to liken its use to a sonographer searching for unwanted abnormalities, only you’ll need a hundredth of the training!

Another added benefit of using the GT-Ultra is its convenience. This gadget requires just four AAA batteries and, measuring at just over seven inches, can easily fit in a kitchen drawer.  Or if you happen to be in a face to face purchasing situation, the simplicity and portability of this product allows you to discreetly test the gold before you close with a purchase.  The GT-Ultra also comes with a one-year warranty and if you visit the website, http://testyourgold.com/, you can find instructional videos and articles on how the technology works…not that you’ll need it.  It really is that simple.  But if you’re a regular Tim the tool man Taylor and prone to mechanical mishaps, you can even email the seller for any additional inquiries you might have.  Equipped with the GT-Ultra and its support package, protecting your gold investments will be one less concern you have in a gold-purchasing industry rife with counterfeits.

How to Find the Best Perth Electrical Company

The primary duty of a registered Perth electrician is to ensure that electrical current flows in a manner that is safe and reliable. However, the electrician may have other duties as well, as assigned by the employer company. Such activities also depend on the electrician’s level of experience and knowledge in the industry.

For an electrician working on a new project such as construction, they need to follow the plan as done by the architect or the owner of the building. From the plan of the architect or the property owner, a certified Perth electrician then handles the installation of the electrical flow within the building.

The electrician installs electrical outlets and switches, circuit breakers and lighting fixtures in their appropriate places, in line with the plan. Based on the complexity of the job,  only qualified electricians in Perth can interpret architectural plans and apply them accordingly to suit electrical installations.

For a Perth electrician working on a new construction project, the main duty is to find out the best way to install the electrical network in the building, such that every place receives power as required and users remain safe at all times. During that work, an electrician installs conduits at appropriate places to hold the cables temporarily before connecting them.

In most cases, qualified electricians work with minimum supervision. Senior personnel can just supervise the junior trainees who are still learning about various aspects of the job. The work of an electrician in Perth is demanding with results, which is why technicians should attend thorough training for better service delivery. This enables the technician to handle any aspect of electrical work, whether it entails new installation, renovation, or just general electrical work.

With electrical project to complete around your home or office, it is important to involve a qualified Perth electrician to perform the job. When it comes to selecting the right electrician in Perth and surrounding areas, it is advisable to consider the reputation of the company offering that service. With many service providers in the market, it pays to have a checklist that can guide you in selecting the right service provider. The following points are quite important.

License: license shows that electrician is eligible to operate in the community. If they have a valid license, insist on seeing it and ensure it is a current copy.  Companies that operate without valid certificate means they are fake and cannot offer effective services in the communities they pretend to serve.

Insurance: Insurance coverage is essential in case of any eventuality. Electrical work has its challenges and accidents are bound to happen any time. In the event that it happens, the insurance coverage takes effect almost immediately. This cushions the project owner from taking the initiative to covers such risks.

Therefore, check the technician’s papers to ensure that everything is in line as expected. The insurance should contain a valid workers compensation coverage that is still in force. Hiring a suitable Perth electrician may sound difficult for many homeowners, but with these tips, you can find the best service provider.

For more information about the best electricians in Perth, visithttp://www.btelectrics.com.au/

Partial Discharge Monitoring Works Carefully In Many Ways

There are many important forms of partial discharge monitoring that can take place as a means of reviewing your overall setup and making sure that nothing dangerous may come about in the process of getting your overall electrical setup ready for use. You have to be careful when finding the right plans for PD needs as the different options that are available for your use can really make a difference in your plans for making something work.

Switchgear Help

PD testing switchgear supplier can help by providing you with information on how your setup is running. This can be used to test the phase and pulse patterns in your discharge. This will review any problems that might come about in order to potentially review and control the system as it is being handled. This can help with reviewing any outage in real time. The partial discharge testing switchgear setup is easy to use and will quickly give you the results that you want.

Cable Support

Another part of partial discharge testing can entail the use of a cable review. That is, the insulation around the cables in a spot will be tested and inspected. The pulses that will be generated can be tested as a means of trying to see if there are any problems coming out of a setup as required. If this is used in the partial discharge monitoring process then it should be rather easy for a setup to be reviewed and checked with care so nothing wrong can come about.

Rotating Machines Checking

Another choice for monitoring entails the review of service motors and generators. Sensors are often used here to analyze different conditions in a spot to see what problems might come about in a machine and can help to check on problems from within a larger machine. This can be critical considering how so many rotating machines may work with such general functions that may be specific and unique in some rather interesting manner.

Thermal Imaging Can Help Too

In many cases you can use a thermal imaging process to get a closer look at the ways how partial discharges may work. A partial discharge may be evidenced by the use of some added heat in some spots. A thermal imaging process is often used to review areas that faults can be found in and can pinpoint the exact spots where different issues might have come about in. It is not always going to be a challenge to handle but if it is used the right way then it should not be too much of a challenge for the setup to be used the right way.

Make sure you watch what goes on when you require a partial discharge monitoring solution to take care of problems that may come about. You can contact Live HV at 1300 460 579 or at livehv.com.au to get information on how to get such a discharge monitored the right way. This can be used to give you more help with the controls that you hold so it will be easier for you to get a material reviewed and checked over without any problems coming from what you might hold.

Five Keys to Improve Small Business Productivity

Every corporation starts small, the CEO being the first employee. Over the years, your goals get bigger and business will require better resources. Building a foundation to your venture requires investments and openness to change. Soon enough you will need smarter streamlining of tasks, more suppliers, and reliable NEC phone system support Sydney specialists. While these might seem far-fetch, these are necessities to expand a growing company.

NEC phone system support Sydney

Here are some important keys to consider when you are prepared to take the big step:

Key #1: Workflow 2.0

What once was an effective workflow for your small business few years back may no longer be effective today. Times are changing, they say, and the entrepreneurs need to cope with the demands of the present. Take a step back and analyze your current workflow; consider the number of employees you have and the cost, time, and effort required to accomplish a task. If there is a way to improve yesterday’s workflow, why not? If something can be done to complete work faster, consider it and experiment if you must – this includes the office design, work hours, and even your office telephone systems Melbourne connections.

Key #2: Connect your Employees

If you calculate the time it takes for employees to relay or exchange tasks and memos, the total can be impressively significant. As the business gets bigger, workflow needs to improve. This includes communications among coworkers. There are NEC phone system support Sydney companies that are dedicated to localized assistance for this kind of transition. You will be surprised at how much time and even paper can be saved.

Key #3: Streamline Work Process Against Multi-Tasking

Multi-tasking can be a form of distraction; stress reduces quality of work knowing that you have a long to-do list for the day. Some may jump from one task to another but still unable to finish a task within the day. When job descriptions get messy, work outputs tend to get messier. Identify every member of the company and set clarity on who will be doing what. Overlap may still occur, but these should remain basic. Let extensive work still be a specialty of one. Create teams and let the respective departments coordinate.

Key #4: NEC Phone System Support Sydney Specialists

Without the HR Department, a company could be in chaos. Who would still have time to think of payroll and benefits while calculating revenues or brainstorming presentations? This goes with all the under the hood system that needs attention. Any growing company must have a dedicated NEC phone system support, as well as an IT group to design and monitor digital work processes.

Key #5: Less Partitions, Cooler Office Designs

This does not strictly apply to all industries, but people need creativity even at most calculative jobs. While distractions must be minimized, people need inspiration to come to work. Who would want to clock-in everyday to a deadpan environment? Design office workplace that could be utilized for the industry of your company without boring every employee.

Find ways to improve next day’s business. PROSUM helps small businesses embrace change. Risks will always be present, but with those risks you discover the right way to your business goals.

For more inquiries, just visit http://www.prosum.com.au/articles/nec-phone-system-support-sydney-melbourne-brisbane.aspx.